|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
vertex in 180 skimmer issues
I cant seem to get this skimmer to overflow into cup no matter what I do I have lowered and lifted skimmer in the sump.. moved the outlet pipe all over.. do you guys see anything wrong here
|
#2
|
|||||
|
|||||
I have a Vertex (In-280) skimmer. You have the outlet pipe pointed the wrong way. It should be down into the water. You need to twist the tall pipe to control outlet flow. Also, can't tell from the pic, but is your air hose connected from the tall pipe to the inlet of your pump?
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. Last edited by Reef Pilot; 12-24-2013 at 04:58 PM. |
#3
|
||||
|
||||
Yes the hose is in place .. and I heard if u have outlet downdown into the water that causes back pressure?
|
#4
|
|||||
|
|||||
Quote:
But it is tall pipe twisting that controls the outflow and raises the water level within the skimmer. Have you done that?
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
#5
|
||||
|
||||
I do I've read that in a few different sites.... and yea I know how its controlled I can have it fully closed and still won't overflow . At first I had it pointing down into water then I heard have it just out of the water....so I'm getting mixed answers... but no matter what I do it won't overflow
|
#6
|
|||||
|
|||||
Are you sure it is fully closed? If so, there should be zero flow coming out of the outflow pipe, which means that the water has no place to go but up you skimmer column and into the overflow cup.
Is your pump working, ie producing enough flow? And do you have the right pump, with the pinwheel impeller? Is the pump outlet correctly inserted, so that no flow can escape from going into the skimmer?
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
Thread Tools | |
Display Modes | |
|
|