|
|
|
#1
01-23-2004, 01:35 AM
|
|||||
|
|||||
mag7 part
Looking for mag7 input housing. I tightened it alittle too much
 anyone with a recked mag7 with good housing or know where to order one from?
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor 
|
|
#2
01-23-2004, 02:45 AM
|
||||
|
||||
|
Oh man, I'll see if I can find you one... bummer.
Doug
|
|
#3
01-23-2004, 02:57 AM
|
||||
|
||||
|
You can get a cover and impeller if you need here. http://www.jlaquatics.com/cgi-bin/sh...Pumps&start=28
Clinton
|
|
#5
01-23-2004, 06:36 PM
|
||||
|
||||
|
Marty, Eric at King Ed says' he'll give me one when he gets them in, if you can wait, they should be in with in a couple days.
Doug
|
|
#6
01-26-2004, 05:25 AM
|
|||||
|
|||||
|
If you are going to use the pump in the sump, you can just put the pump and housing together with ZAP straps. That is what I did when I tightened the srews to tight and broke the housing. That was 2 years ago and it is still holding.
Tom R
|
Linear Mode
