|
|
|
#1
06-02-2011, 09:11 PM
|
|||||
|
|||||
Help replacing seals in Reeflow Pump
Hi My Tarapon Reeflow pump is leaking from the pump/motor attachment area, i have boughten the seal replacement kit except no large o-ring came with it. Does anyone have experience with replacing the seals and where do i get a o-ring from. Any advice would be appreciated . Thanks
Brent
__________________
CAD 22 brent 
|
|
#3
06-02-2011, 10:48 PM
|
|||||
|
|||||
|
They have a very long and detailed set of directions on their site. Pictures included. http://www.reeflopumps.com/tipstroubleshooting.html
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour
|
|
#5
06-03-2011, 03:27 PM
|
|||||
|
|||||
|
For the o-ring you can measure it and match it so an AS568 number using a chart like this one:
http://www.marcorubber.com/sizingchart.htm Then use that number to try and locate one locally, typically bearing suppliers like B&T carry a full line of o-rings.
|
Linear Mode
