![]() |
#1
|
||||
|
||||
![]() im about to get a reactor vertex 15 and im wondering if i can have np pellets and carbon in one reactor? its a 20g with 10g sump
|
#2
|
|||||
|
|||||
![]() how are you going to replace the carbon?
it will take a few months for your system to consume the pellets (they are NOT replaced - they are replenished once they are used up) carbon (IDEALLY) should be replaced every two weeks to a month so you will need to remove it from the reactor and separate it from pellets and put in new carbon. I think the flow requirements for both are different as well. |
#3
|
|||||
|
|||||
![]() I wouldn't mix them. Reason is that you remove/replace the carbon on a regular basis and you only top up the pellets as needed. It would be a real mess trying to do that.
I would either use a second reactor for the carbon, or just run them in bags passively.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#4
|
|||||
|
|||||
![]() As phi delt reefer mentioned the proper flow for each is different. You'll want a slower amount of flow through the carbon so that they don't tumble which would cause them to grind together and release dust into your tank. However with the pellets you do want them to tumble so that they don't fuse together into a solid mass.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour |