![]() |
#1
|
||||
|
||||
![]() Currently running Phosban, wonder should I add another reactor running carbon.
Thanks. |
#2
|
|||||
|
|||||
![]() I'm running both, actually noticed imporvements once i started running both
|
#3
|
||||
|
||||
![]() I run carbon 24/7
|
#4
|
|||||
|
|||||
![]() I run carbon 24/7
If you run in a reactor with constant forced flow, then I would probably start off with 50% of the recommended volume for your size of tank. If you are running it passively somewhere in your sump/tank, then you can run 100% of the recommended volume of carbon.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#5
|
|||||
|
|||||
![]() I run chemipure elite in my reactor and change it out about every 2 months or so. Gives me po4 reduction and carbon. I rinse out the bag to get rid of the sediment, cut the bag open and dump it in the reactor, fills a tlf 150 just over half full.
__________________
Do you smell that? Just waaalk away...... sloooowly |
#6
|
||||
|
||||
![]() Great. Thank you to all for your information. Cheers.
|