|
|
|
#1
10-04-2009, 06:11 AM
|
||||
|
||||
One or Two closed loop pumps
Turns out that my closed loop pump isn't enough flow for the tank so I either buy a new larger pump or a new pump the same size and use it with my existing with some reconfiguring of the plumbing. I want about 1400GPH and have a single 1" bulkhead to feed the closed loop.
Would using two 700gph pumps off the same 1" input cause them to cavitate each other? Thanks, Ken 
|
|
#2
10-04-2009, 04:30 PM
|
|||||
|
|||||
|
I'd recommend a single high pressure pump (because of the 1" bulkhead) or get your tank drilled again for the second pump.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour
|
Linear Mode
