![]() |
#1
|
|||||
|
|||||
![]() I am looking at the Lumenarc III Mini reflectors (14.5"Lx14.5"W) for my new lighting on my 75G tank (48"Lx18"W)... would 2 reflectors provide adequate coverage over the length of my tank, or should I look at getting 3?
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894 62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988 |
#2
|
||||
|
||||
![]() I have 3 on my 220 which is 6 feet long and they work great. Two should be lots of light for a 4 foot tank. Also with it only being 18 " deep you can have them higher off the tank so the light spreads wider.
|
#3
|
|||||
|
|||||
![]() My tank runs two of these exact units! My tank is also 48" long. works great!
|
#4
|
|||||
|
|||||
![]() Quote:
![]() How high off the water are your units?
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894 62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988 |
#5
|
|||||
|
|||||
![]() Quote:
I am very happy with the results. |
#6
|
||||
|
||||
![]() Yeah two of these on a 75 will cover everybit of the tank, I had two on my 4x2x2 120g about 9" above the waterline and it covered everywhere. I now have one over my 75g 24x30x24 and still get great coverage.
__________________
75g 24x30x24 w/external overflow 35 sump/fuge 250w Ice Cap MH with Radium 20k & Luminarc Reflector PS4 Return -PCI Chiller - WavySea 2 x Tunze 6101 H&S A150-2001 2 x Deltec Reactors Carbon/Phosban Profilux Plus II |
#7
|
|||||
|
|||||
![]() Great... Thanks for the feedback guys!!
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894 62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988 |
#8
|
|||||
|
|||||
![]() Rule of thumb is 2 square feet per reflector so your covered
J |
#9
|
|||||
|
|||||
![]() Are the lumenarc mini's easy enough to mount to the top of a canopy?
Tks |
#10
|
|||||
|
|||||
![]() Yes - there is a screw hole right in the centre that you just put a screw through to the surface you're mounting onto.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |