![]() |
#1
|
||||
|
||||
![]() I am setting up a 220 gallon tank. The tank had a glass center brace that i removed and replace with euro bracing. The glass is 1/2" thick. Now that i have filled the tank i see the front panel has bowed out about 1/8" at the top center. The tank has been filled and running for almost a week and there has been no change. Should i be worried about this or is this normal? I want to start adding rock but want to know if i should drain the tank and do something else with the bracing. I have talked with a few people who seem to think 1/8 on a 6 foot tank is nothing to worry about. Any advice would be great.
Thanks |
#2
|
||||
|
||||
![]() ttt
|
#3
|
||||
|
||||
![]() Did the glass pull away from the Euro bracing? Are you sure the bow wasn't there before you added water? Is the bracing cut straight? If I did it myself I would want all the answers before I continued.....Elvis could do the work for me and I would trust it more. And I could blame someone if it went bad.
Scott |
#4
|
|||||
|
|||||
![]() Quote:
what size glass was the euro brace done with...how wide is the euro brace.....and one last question, is it siliconed down to the top of the tank or the inside of the tank, or both
__________________
500G Mixed Reef ![]() __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin |
#5
|
||||
|
||||
![]() Quote:
|
#6
|
||||
|
||||
![]() Quote:
|
#7
|
|||||
|
|||||
![]() My 33g bows more than that.
|
#8
|
|||||
|
|||||
![]() I'd say your fine then!
__________________
500G Mixed Reef ![]() __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin |