A couple MH light questions

MikeP · #1 08-09-2007, 04:53 PM

I have 2 pendant style mogul base MH lights over my tank. They are what I call lampshade style

(see pic). I have 175 watt 14k bulbs in there and my questions are...

1) The inside of the pendant is white in color, is that typical of this style? I'm wondering because I thought I would see a bit of blue in the tank with the 14k bulbs but there isn't even a hint of blue. I was thinking that is because of the white reflective surface in the pendant and even if I bought 20k bulbs it might not make any difference.

2) There are no markings on any of the lighting equipment that says it runs 175 watt bulbs. I only put 175w in because that's what was in there when I picked the stuff up. How can I tell if the ballasts are rated for a higher (or lower) wattage bulb?

Thanks for any info

michika · #2 08-09-2007, 04:55 PM

Can we see a photo of the inside of the reflectors please?

danny zubot · #3 08-09-2007, 05:14 PM

I'm not an expert but if the balasts aren't rated for the same wattage as the bulbs, they simply won't work, or they'll blow if the balasts are too high.

As for why you aren't seeing the blueness that you thought you would, it coould be for a number of reasons. I.E. Some bulbs don't run at a true 14K even though they say so. Do you know the make of the bulbs?

saltynuts · #4 08-09-2007, 05:19 PM

you might have to let the bulbs burn in.
just my 0.02c

Static · #5 08-09-2007, 05:30 PM

if it's a magnetic ballast it should have one of these numbers on it somewhere.

150W M107 (It seems that M107 and M57 are used interchangeably for either 150W or 175W. I think the Bulb should have a
matching number on it.)
175W M57
250W M58
400W M59
1000W M47
1500W M48
1650W M112

MikeP · #6 08-09-2007, 07:25 PM

I will take a pic of inside when the lights are off, but it's just painted white. The bulbs have been going for 3 months, how long does it take for them to burn in? I will check the bulb manufacturer when I get home but pulserite seems to ring a bell. How do I tell if I have magnetic ballasts?

Chin_Lee · #7 08-09-2007, 07:58 PM

Quote:

Originally Posted by MikeP

I will take a pic of inside when the lights are off, but it's just painted white. The bulbs have been going for 3 months, how long does it take for them to burn in? I will check the bulb manufacturer when I get home but pulserite seems to ring a bell. How do I tell if I have magnetic ballasts?

the magnetic ballast are heavy and looks like a block of metal. open up the case if you can to look for any markings on the ballasts. thats the only way you can be sure of what you have.

MikeP · #8 08-09-2007, 08:42 PM

Quote:

Originally Posted by Chin_Lee

the magnetic ballast are heavy and looks like a block of metal. open up the case if you can to look for any markings on the ballasts. thats the only way you can be sure of what you have.

I'll check that out...just have to wait until they're cool enough to pick up.

MikeP · #9 08-10-2007, 02:55 PM

Here is a pic of the inside of the pendant. Is this normal or oddball? The pic had to be taken with the flash off but you get the idea.

michika · #10 08-10-2007, 03:39 PM

From the photo it looks like the inside of the reflectors is painted white? I personally have never seen a MH reflector like what you have. Sorry I'm not really sure what to tell you.

I'll see if I can get KrazyKuch to look at this thread as he is an electrician by trade. Hopefully he can give you some answers.