![]() |
#1
|
|||||
|
|||||
![]() My 5" squamosa clam hasn't fully opened up in about 3 weeks now. It sits at the bottom of my 24" high tank under 1 400 watt 14K bulb as ot has for the past year. I can't figure out why it won't open since nothing has really changed in the tank except the lack of a sandbed since I moved December 1st.
My levels should be ok with: Ca @ > 400ppm usually Alk @ 7-9 KH Mg @ >1280ppm. I do water changes with OP Pro salt every 2-3 weeks and only dose iodine other than what is needed to maintain the above levels. The first time a noticed it not opening is when I started to use a two part appoxy for securing corals. But its been three weeks now! Another note, I medicated the tank for cyano about 4-5 weeks ago. I haven't been feeding the corals (phyto) as often as I have in the past, maybe once a week. Any red flags going off regarding my practice? Also, I know the clam is still alive because it did open half way (compared to normal) about 4 days ago.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#2
|
||||
|
||||
![]() Quote:
http://www.dtplankton.com/articles/necessity.html |
#3
|
|||||
|
|||||
![]() Run carbon. My clams get cranky when I use too much of it. 3 weeks is kind of long for them to hold a grudge though
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#4
|
|||||
|
|||||
![]() Quote:
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#5
|
|||||
|
|||||
![]() Sorry, I had some trouble posting there. When I use too much epoxy the clams get cranky.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#6
|
|||||
|
|||||
![]() Hmm, maybe time for a big water change then.
![]()
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#7
|
|||||
|
|||||
![]() Just to follow up, I've been feeding 3-4 times a week since my last post on the 25th of January using Phytomax . I've rotated between night feeding and daylight feeding because I'm not really sure when clams do most of their eating. Anyone know? I have also done a 20% water change, and all levels haven't fluctuated from the above levels.
The clam is still closed up, though it has opened up a few times. It's tissue looks healthy except for what looks like a small hole beside it's long tuby thing. (excuse my lack of knowledge of clam anatomy) Sorry no pics at this time. So what now? It's been like 5-6 weeks since it has stayed open. Should I consider selling or trading it to someone else to see if they have better luck?
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#8
|
|||||
|
|||||
![]() Maybe take a moment to visit clamsdirect.com. They might be able to help you further with your clam.
Good luck! |
#9
|
|||||
|
|||||
![]() Posted a similar thread to this one clamsdirect.com, I'll post any results that may help.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |