|
|
|
#2
02-10-2008, 09:21 PM
|
|||||
|
|||||
Nice stuff! Keep us posted.
__________________
M2CW 
|
|
#4
03-31-2008, 03:04 AM
|
|||||
|
|||||
|
Other system is on hold as I had to finish some renovating first so I figured I would build the QT system first.
25 gal Main with refugium and sump. A few pictures. Could of used more space but I think it will be okay.    
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#5
04-04-2008, 01:33 AM
|
|||||
|
|||||
|
So Its all running with water now added my rocks and sand plus one piece of live rock some seed sand and some Tiggerpods.
Tank   Fuge  Sump  Piece of live rock  Came with a present.  My Tigger pods seam to have found something to eat. 
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#6
04-04-2008, 04:00 AM
|
||||
|
||||
|
I think this is a really cool thread. Could you explain some of your plumbing a little more on the QT and Fuge? I am going to be doing my first nano shortly and could use any ideas.
__________________
Mark...  290g Peninsula Display, 425g total volume. Setup Jan 2013.
|
|
#8
04-04-2008, 05:43 PM
|
|||||
|
|||||
|
It looks a bit strange because I originally had a bit of a different plan in mind but ended up running out of room so had to adapt a bit.
One of the stand pipe is on a gate vale and just feeds the fuge. That water runs over the black overflow into the next compartment along with the other stand pipe, and from there both go to the sump in the lower level. Back to the tank on a Mag 9.5 through a SWCD Originally I was going to run one standpipe to the Fuge and one to the sump but I had problems with getting the plumbing all in there. Next job will be to finish the rest of my 60 gallon cube. Wanted to set this up and get it ready so I have somewhere to QT my fish ect. Anyone have any ideas for a not so noisy pump would like something about the size and output of my mag 9.5 as I am limited on space. I will also have to find a smaller heater to fit in the sump, but with 250w on 25 gallon I probally will not need one.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#9
05-05-2008, 09:49 PM
|
|||||
|
|||||
    A few pictures of some of my new pets. 
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
Linear Mode
