![]() |
#1
|
|||||
|
|||||
![]() I decided to upgrade my current 48" Coralife AquaPro 150W system to the 72" AquaPro 250W system. Can anyone give me any sugestions on how to acclimate my system to handle the additional 642 watts without bleaching my corals?
Currently my MH lights are on an 8 hour cycle.
__________________
Visit my Gallery http://www.canreef.com/photopost/sho...user=2209&sl=b 150 Gal Deep Dimension Cube, with Model 2 sump/filter, CO2 reactor, milwakee pH controller, auto-top off, 2 radion LED lighting, Vortech MP40 cor internal circulation. |
#2
|
|||||
|
|||||
![]() I would start with a 5 hour or less cycle and go up from there.
__________________
M2CW |
#3
|
|||||
|
|||||
![]() How long before increasing the duration? few days, week?
__________________
Visit my Gallery http://www.canreef.com/photopost/sho...user=2209&sl=b 150 Gal Deep Dimension Cube, with Model 2 sump/filter, CO2 reactor, milwakee pH controller, auto-top off, 2 radion LED lighting, Vortech MP40 cor internal circulation. |
#4
|
||||
|
||||
![]() Also, maybe have the lights up higher for the first few days & gradually lower it.
|
#5
|
|||||
|
|||||
![]() Other things that you can do is to put the light higher and slowly lower over the course of 3-4 weeks. You can also buy several sheets of window screening and put 7 or 8 layers over the top of your tank and every week take off one layer. Simply shortening the lighting schedule may not be enough given the extra intensity of the light - it will definately help but may not be enough. You may have to move your corals lower in your tank and slowly bring them up again over a 3-4 week period and at the same time increase the time the lights are on.
|
#6
|
|||||
|
|||||
![]() Quote:
__________________
M2CW |
#7
|
|||||
|
|||||
![]() How much higher should I raise the lights? a few inches more?
__________________
Visit my Gallery http://www.canreef.com/photopost/sho...user=2209&sl=b 150 Gal Deep Dimension Cube, with Model 2 sump/filter, CO2 reactor, milwakee pH controller, auto-top off, 2 radion LED lighting, Vortech MP40 cor internal circulation. |
#8
|
|||||
|
|||||
![]() You could also put 1 or 2 sheets of egg crate on top to filter the light.
Doug |
#9
|
||||
|
||||
![]() Have you already purchased the unit? The 250 version has a lot of ballast problems.
__________________
This and that. |
#10
|
|||||
|
|||||
![]() Yes its on it way to me... What kind of problems?
__________________
Visit my Gallery http://www.canreef.com/photopost/sho...user=2209&sl=b 150 Gal Deep Dimension Cube, with Model 2 sump/filter, CO2 reactor, milwakee pH controller, auto-top off, 2 radion LED lighting, Vortech MP40 cor internal circulation. |