![]() |
#1
|
|||||
|
|||||
![]() 90g with overflow in left rear corner. 1.5" bulkhead. Overflow is drilled for closed loop intake with 1" bulkhead (and plug since I never used a closed loop).
Sump is a 40g tank with 4 baffles. Drilled for skimmer intake or sump return intake. 1" bulkhead and valve/union. Also drilled for float valve for topoff. Black tubular steel stand. Setup is approximately 1.5 years old. Was run as a reef but would also make a nice FW setup. Everything is in good condition. Tank has no scratches. Stand has a little rust on the bottom cross bar from the occasional SW spill when doing waterchanges and whatnot, but overall is solid (trustworthy and dependable). $300 for the tank, stand and sump. $250 for tank and stand if no need for the sump. I also have an ASM G1X skimmer that I was using on this tank, let me know if interested.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() What are the measurements of the tank?
__________________
Nial McCracken 95 gal... Going well so far |
#3
|
|||||
|
|||||
![]() Hi - it's a standard 90g, 48x18x24.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#4
|
|||||
|
|||||
![]() Sold. Thanks!!!!!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |