![]() |
#1
|
|||||
|
|||||
![]() I have a few questions and any input would be appreciated.
I am starting up my second 30 gallon cube tank in the near future. I want to make it into species tank with two clowns and an anemone. I have had this plan for a couple of years now and I have a lack of information on lighting requirements, flow requirements and what anemone would work best in a 30 gallon cube. Does anyone have any links to a site that has some reading material so I can get some research going. Thanks in advance
__________________
Stan |
#2
|
|||||
|
|||||
![]() Stan,
Before I got my GBTA, I did a lot of reading on RC's Anemones & Clownfish Forum. There is even a FAQ on anemones near the top of the page.... http://www.reefcentral.com/forums/fo...?s=&forumid=36 |
#3
|
|||||
|
|||||
![]() My opinion...
For a 30g cube species only tank. I'd go with either a Bubble Tip Anemone, or a Long tentacle anemone. I would go with a Bubble tip if it were my choice. Lighting can be as easy as a PC fixture. Halides or anything else is good too, but not neccessary. Flow ... just make sure it's a moderate flow so the anemone is waving slowly in the current.. not being bashed around by the flow. HTH somewhat..
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#4
|
|||||
|
|||||
![]() Thank you for the info
![]()
__________________
Stan |