![]() |
#1
|
||||
|
||||
![]() Hey everyone,
I Have a nano that is at the end of its cycle and I just replaced my glass thermometer with a digital one. It reads as 84 degrees farenheit. I was just wondering if this is too hot for fish, corals, and invertebrates. Will it be alright as long as it is kept constant or do I need to develop some way to cool the water? Unfortunately, this is not just a matter of turning down the heater. I have a mag 7 pump submersed as the return pump and I believe the pump is generating all the extra heat. Thanks, Justin |
#2
|
|||||
|
|||||
![]() It's probably a little warmer then it should be because you have no margin for error. Maybe a small fan could be used to cool things down a bit
|
#3
|
|||||
|
|||||
![]() Mine will hit 84 about an hour and half before the lights go out with no ill effects
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!! |
#4
|
||||
|
||||
![]() my tank may just have to be a global warming themed tank.
![]() Actually I think I may freeze a big chunk of my top off water so the water topping off the tank will be ice cold. Do you think that'll work? |
#5
|
|||||
|
|||||
![]() You should be OK.... but keep an eye on it... high temps affect the levels of dissolved oxygen so don't overstock... also remember that hydrometers aren't temp calibrated so keep an eye on salinity as well.
How far are the lights from the surface? I know I save about half my chiller power just by raising my lights 3 inches...
__________________
135G Mixed Reef. Bullet 2, 25 gal refugium, 2 X250W MH + 4X 96W PC\'s, DIY Calcium Reactor, Coralife 1/6 HP Chiller, Phosban, Tunze, 2 closed loops & SQWD\'s, Seios, Coralife 4 stage RO/DI & a bunch of other expensive gadgets... I may never retire, but I'm gonnahavahelluvanaquarium! |