|
|
|
#1
09-19-2005, 02:25 PM
|
|||||
|
|||||
Fan Size
How many cfm would be required roughly for a 4' tank with (2) 250w halides in a mostly sealed hood.
__________________
M2CW 
|
|
#2
09-19-2005, 08:13 PM
|
|||||
|
|||||
|
i have a 5' 105gal tank in my basement, I have a 120mm fan on each end of my canopy, 1 blowing air in, 1 sucking air out. When I run the fans at full speed, my tank temp goes down, even with the halides on..so I turned them down to 9v instead of 12v. I'm not sure what the cfm is now, but full speed is around 86cfm.
__________________
a tout le monde, a tous les amis. je vous aime, je dois partir.
|
|
#3
09-19-2005, 10:50 PM
|
|||||
|
|||||
|
I was thinking around a 100 cfm, but thought I would ask.
__________________
M2CW
|
Linear Mode
