PFO Miss labeled ballast

[bluetang]

First of all, Hats off to the guys and gals of PFO Lighting for their service.
For the last 6 months I've been unhappy with the lighting in my tank. I have 3 X 250w HQI pendants over a 125g 6 foot tank. The middle light was running off of a single ballast while the ends were running off a double ballast. The ends were always really dull compared to the center. I however had 10k in the middle and 20k's on the end, so I thought that was the problem. I changed bulbs a couple weeks ago to all the same bulb and the ends were still very dull and yellowish.
Today I had enough and called PFO. After talking with Peter, And us taking the housing off to look at the ballast and the wiring over the phone. We discovered that the ballast was NOT a HQI ballast afterall..... It was mislabeled and sold under a HQI name. THerefore the bulbs were really only firing up half way.
To fix the problem PFO is sending me a new ballast and only after receiving the new one do I have to send the old one to them..
Hats off to them for that.. Usually most places want the product in there hands and only then will send out the new one..
Thanks PFO
Rob