![]() |
#1
|
|||||
|
|||||
![]() Just wondering if anyone has used the chrome eggcrate instead of the white. Wondering what the results were. Also have heard people using black, but I've never seen what that looks like.
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms. |
#2
|
|||||
|
|||||
![]() Not an expert on eggcrate, but think the chrome isn't real chrome just chrome-looking spray paint. Would bet salt would corrode it rather easily. JMO, though.
|
#3
|
|||||
|
|||||
![]() What do you plan on using it for, if its to cover the top of a tank i think it would work well, but its expensive compared to white. I wouldnt waste my money to use it on overflows.
__________________
Sean ![]() Back in the good ole days ![]() |
#4
|
|||||
|
|||||
![]() I doubt there would be any positive returns, really. The chrome will reflect light whereas the white is refracting it. The net amount of light is still going to be practically the same. That and, as Beverly said, the paint that can chip and corrode makes not worth the added investment imo.
Then again, I just really like white. ![]() |
#5
|
|||||
|
|||||
![]() It does not matter if it is Chrome or Paint, my rule is to keep foreign matter out of my tanks. If it is not found in the ocean then it should not be in the tank. There are exceptions that you will have to decide on their true requirement.
Tom R |
#6
|
|||||
|
|||||
![]() Quote:
![]() ![]()
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms. |
#7
|
||||
|
||||
![]() dont use it the salt will turn it black i tryed overtop of my fuge its crappy stuff
__________________
75gal RR Tank with 2 Seio 620 and 2 maxijet 1200, 2 150watt HQI and 2 Antic PC, Turbo Floter Skimmer with 9.5 Mag to tank and fuge, Sump is 75gal with a 22gal fuge, 40gal Auto topoff. |
#8
|
||||
|
||||
![]() just stick with the white!
__________________
Worry is like a rocking chair, it will give you something to do, but it won\'t get you anywhere. |
#9
|
||||
|
||||
![]() Wow. Sounds like a consensus to me.
![]() PS. You can add my name to the "don't do it" list. Anthony |
#10
|
|||||
|
|||||
![]() I was assuming it was a cover as well. Also bear in mind there's and up and down side to eggcrate if you're using it for a tank. I don't remember exactly how you tell (check the DIY forum on RC for massive, incredibly boring discussions on the matter), but its designed to rereflect light that's bouncing back up back down again.
My brain hurts just thinking about it. |