![]() |
|
#1
|
|||||
|
|||||
![]() Who turns their powerheads down at night?
I have always left my jebao's night mode on. However i recently made an equipment box that houses all my electrical doodads. Now that the wavemaker (RW20) controller is in this box...its too shaded for the night mode to work. It stays off until i shine a light on it. So now I just turned it off. Before Jebao's I never did anything at night with my powerheads and everything was fine. So who uses night mode? Any known benefits? Only downside is that this an RW20, so it does push crazy amount of water. I dont want to stress my fishy friends.
__________________
![]() They call it addiction for a reason... |
#2
|
|||||
|
|||||
![]() Yay to night mode. No scientific evidence to whether or not it makes any difference but I guess my fishes sleep better since they don't have to keep on swimming to stay still. Was having the same issue that you are having; my controllers were located inside the cabinet so night mode wasn't the option. Aquatronica controls them now.
During night time, ocean is much calmer so I guess night mode might be beneficial.
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#3
|
|||||
|
|||||
![]() I was thinking of adding a little LED light in there timed with my lights.
I think it would be a little easier on the fish too.
__________________
![]() They call it addiction for a reason... |
#4
|
||||
|
||||
![]() I use night mode as a way to cool down my powerheads. Also, oceans seem to be calmer at night time, so I think fish and corals prefer it that way.
Last edited by iamfrontosa; 04-22-2016 at 04:20 AM. Reason: spelling |
#5
|
|||||
|
|||||
![]() For what it's worth, I programmed my MP10s through their online stuff - ReefLink.
At night I run them 25-50% of their daytime settings with varying speeds. I feel it's good for the fishies/corals to have a break from the daytime chaos. As Raied mentioned, they need rest just as we do. With this in mind I also only run the moonlights for an hour after lights out 'cause I'm too tired to look in there at night anymore ... |
#6
|
||||
|
||||
![]() this is a good question I will be following along.
I recently hooked up my 4-RW8s to my apex and they run 60-100% during the day and run 30-40% during the night ( numbers are ballpark but pretty close i cant remember exactly) with my new 250G DD i ordered 2 RW15s i figure ill keep them both on the same side on a wave mode and have my other 4 RW8 along the back wall maybe 12" off the sand as I have my snapper return with 4 outlets spaced evenly along the back near the surface. I havent noticed a difference either way in my corals, slowing them down at night but its only been a couple months running off the apex. I may run the rw15s off the apex and run the 4 rw8s on their stock controllers on random mode as it seems to be alot more random than what the apex can do ( or what the operator can set it to do) i cant seem to get a full random mode going just 2 different %s.
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |
#7
|
|||||
|
|||||
![]() I drop mine down to 20% at night
![]()
__________________
ReefDudes Shallow Reef Tank | Fusion 30L Tank Log | DIY FishTankProjects | Arduino Auto Doser | Fluval Edge nano Reef |
#8
|
||||
|
||||
![]() You can turn down (as many members on here do), just don't turn off. Its the current and wave action at the surface that aerate your water. I have a high bioload but lots of hiding places and areas of lower flow so I leave my wavemakers on all the time. The fish don't seem to mind and neither do the corals.
|
#9
|
|||||
|
|||||
![]() I use the jebao apex module to program my powerheads and have them set at minimum for the night, before that I had a led light strip in my cabinet on a timer and the pumps would be set to night mode.
I leave my return pump at the same lvl so the circulation stays the same, just the powerheads are reduced. |
#10
|
||||
|
||||
![]() I use night mode on my Jebao RW-15, my electronics are in a closed cabinet so I have a small LED light on a timer, works well my return flow stays constant.
__________________
220Gal Dining room build complete! no bucket or barrel water changes!!! ![]() |