![]() |
#1
|
||||
|
||||
![]() Let's see your LEDs! Give us the make/model what % you run at etc, and for the DIY fixtures tell us the leds you've got etc! Pics are a must.... Full tank shots please
|
#2
|
|||||
|
|||||
![]() |
#3
|
||||
|
||||
![]() Looks like 20 pages of garbage to me this ain't a discussion we want pics and ur setup and that's it.... Those threads were 3 years ago a lot has changed
Last edited by canadianbudz604; 08-29-2014 at 06:32 AM. Reason: Yep |
#4
|
|||||
|
|||||
![]() ![]() ![]() ![]() ![]() 3 x Mitras 6100HV run in high efficiency mode. I think my highest peak is the blues at ~70% around noon. Everything else is up and down depending on time of day. |
#5
|
||||
|
||||
![]() Sorry this is a bit harsh, but we just wanna know what you run and see a pic
|
#6
|
|||||
|
|||||
![]() I've been running my DIY effort for just over 2 years now. There have been modifications & upgrades but nothing major. I've used 10 watt multi-chip LEDs mounted on 3 rails in a wooden frame. Combination of 10,000K, 7,000K White and Blue & Royal Blue LEDs controlled by manual dimmers & timers.
http://www.canreef.com/vbulletin/sho...9&postcount=47 The link at the bottom of any of my posts will take you to my build thread. It's only 3 pages on my laptop, not sure how many that translates to on a smart phone. Depends on your forum options. Post count is 93 atm.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#7
|
|||||
|
|||||
![]() I had been running 100w LEDs for a couple years and now on the new tank since January (roughly)
I have a total reno build thread and more detailed on the LEDs buildFijiReefRock tank build ![]() Yes its crazy as they are running (all10) at 25% in the below picture ![]() ![]() |
#8
|
|||||
|
|||||
![]() Ill bite
LED by rapid led 3 heatsinks dimmable full spectrum Took a Quick video of the tank tried to get the colour accurate PLEASE PRESS HD and let it load https://www.youtube.com/watch?v=JAYG-QjA_ns ![]() ![]() ![]() And here is one heatsink over my 30 gallon Really happy with the growth and easy to set up and around 1000$ from start to finish for 3 heatsinks with controller and dimmable for a 125g tank with the same if not more par than radians just less control
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#9
|
|||||
|
|||||
![]() |
#10
|
|||||
|
|||||
![]() Looks good man, looks like you get lots of coverage from both
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |