![]() |
|
#1
|
|||||
|
|||||
![]() Looking for some advice.
I have a basic rectangular nano tank that I just built and all in one chamber on. Dimensions for the water in the display are 14.5" x 11.25" x 11". Total water volume in display section is only 7.7 gallons. The overflow is a long oval slot that measures 5"x 3/8" I don't think the overflow will handle a wave very well, the water level is only 1/2" for the top and its rimless, so if I go the Jebao route it would only be used on a steady mode. I want a powerhead that's small, no wave, and provides enough flow so that detrius doesn't settle on the bottom... It's a bare bottom BTW. Anybody have experience with both that could shed some light on advantages or disadvantages? |
#2
|
||||
|
||||
![]() The wp10 is smaller than a 240. Its wave won't go over the top. U will enjoy the wp10 more as u can adjust the wave, or have a solid current. 240 is just a eater pusher....boring.....
Sent from my HTC Desire 601 using Tapatalk |
#3
|
||||
|
||||
![]() Quote:
the wp10 is small in size but not the flow it can create..... I have a 50-55g main tank and I am planning for 2x wp10 to create my flow.... wp25 has a lot of flow potential... |
#4
|
||||
|
||||
![]() Quote:
i have 2 of the wp10s in one of my frag tanks that is 29 gal and it is about right. Can't see them being enough for a 50+ gal unless it is a softy tank. Just my opinion.
__________________
Nick |
#5
|
|||||
|
|||||
![]() Already a Jebao fan and have owned 2 WP25's.
On the lowest setting the WP10 won't be too much flow for a 7.7? I don't wanna be chasing frags around the bottom ![]() And it's smaller the the koralia? If so, sweet Thanks! |
#6
|
||||
|
||||
![]() i have a bunch running and if you not ina hurry i can set up a test and let you know how it is in there. if it is a sps tank i would almost say for sure it will be fine but if lps or softy i would go with the lesser flow of the korillia.
__________________
Nick |
#7
|
||||
|
||||
![]() Water pusher
Sent from my HTC Desire 601 using Tapatalk |
#8
|
||||
|
||||
![]() I have the WP25 and love it. Great pump, super quiet and a ton of features. I have the Koralia 240, and it suffers from stoppage issues a lot, especially when restarting. Also, the pivot arm on the Koralia are pretty fragile. Go with the Jebao!
|
#9
|
|||||
|
|||||
![]() I also have a WP25 in my 18" X 18" X 18" cube. On it's lowest setting, I have no doubt you can set it up to not create a wave. I have mine 2/3 of the way down pointing up and on it's middle setting it gets about 1/2"-3/4" wave going. But even then you can slow the pulse so it just breaks the surface and doesn't actually create a wave.
I'd recommend going with a WP25. |
#10
|
|||||
|
|||||
![]() I was VERY skeptical of the jebao pumps initially, but after using a couple of WP 40's for several months I'd never buy another brand of powerhead, except maybe some maxijets for utility purposes
![]() For price / performance they can't be beat. Even just for performance it's tricky then you factor in price its a no brainer imo. |