|
|
|
#1
03-27-2014, 05:30 AM
|
|||||
|
|||||
Skimmer Troubles
I just recently purchased a Bubble King SM300 Protein Skimmer.. & I'm having some issues!!
When I get the level of the bubbles to the height I want them at.. Millions upon millions of micro bubbles spew like crazy from the output AND & from around the seal where the body & base plate meet.. Am I doing something wrong in the tuning process? Any tips or advice? Thanks in advance!! Sent from my iPhone using Tapatalk 
|
|
#2
03-27-2014, 05:53 AM
|
||||
|
||||
|
water height?
where is the bubble height? both pumps running?
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
|
#3
03-27-2014, 06:41 AM
|
|||||
|
|||||
|
Both pumps running, water height is 9.25" trying to keep the bubbles a quarter the into the cup. But it's spewing micro bubbles out of it.
Sent from my iPhone using Tapatalk
|
|
#4
03-27-2014, 06:42 AM
|
||||
|
||||
|
drop water height to 8" first.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
|
#5
03-27-2014, 06:44 AM
|
|||||
|
|||||
|
Okay. Will do that in the morning. But I don't see how that's going to stop the micro bubbles from spewing out from between the Body & base plate..
Sent from my iPhone using Tapatalk
|
|
#6
03-27-2014, 07:39 AM
|
||||
|
||||
|
Can u send a pic?
body and base plate. Are they removable or supposed to be glued. If removable, is there an O ring supposed to be there? or another type of gasket? Sorry I don't have one of these, but I am sure bubbles should not be escaping from there
|
|
#7
03-27-2014, 12:20 PM
|
|||||
|
|||||
|
I got one of these skimmers, start with the outlet full open, seems to me if ur having bubble issues you didn't attach the Venturi hose or ozone hoses correctly. Maybe didn't tune the Venturi, turn it in all the way then one complete turn out to line the dots up.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank
|
Linear Mode
