![]() |
|
#1
|
|||||
|
|||||
![]() Other day was putting the skimmer back and always been little tight so was thinking really don't need that bubble trap on the drains anymore since converting to Herbie. Now just read spit.fires build and noted his/wardogs comment about baffles.
Figure I could do a bubble trap about the size of a 2 litre pop bottle for skimmer and pull all the baffles or just keep the last "over" baffle. Either way would be gaining room in my skimmer/return section. Might be loosing some gas exchange but another plus for running a Herbie.
__________________
my tank |
#2
|
|||||
|
|||||
![]() Quote:
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#3
|
|||||
|
|||||
![]() I haven't had baffles in my sumps for years. I run the overflow into a filter sock and the skimmer effluent is at the opposite end of the sump from the return so bubbles don't return to the tank.
Now if I could just do something about the fish stirring the detritus in the tank the water would actually be half decently clear ![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |