|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
08-09-2009, 06:37 AM
|
|||||
|
|||||
What is the best way to clean old equippment.
What is the best way to clean old equippment safely? Like skimmers power heads and so on.
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! 
|
|
#3
08-09-2009, 06:37 AM
|
|||||
|
|||||
|
Try this
Vinegar and water always works well.
|
|
#4
08-09-2009, 06:42 AM
|
|||||
|
|||||
|
What tip and how mutch?
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind!
|
|
#5
08-09-2009, 04:17 PM
|
|||||
|
|||||
|
just regular white vinegar. I usually use between a 25% and 50% solution depending on how fast I want it to work and how much gunk there is to be removed. Leave it in the solution for a few hours or overnight for heavy buildup.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#6
08-09-2009, 04:20 PM
|
|||||
|
|||||
|
I just buy the biggest jug at the store, and use it 100%...maybe 75% if I need a bit more volume. I dump it into a 2 gallon pail, and throw all the equipment in the bucket over night. If I have more stuff then will fit it the bucket I just do it again the next day reusing the same vinegar.
Last edited by Myka; 08-09-2009 at 04:35 PM.
|
|
#7
08-09-2009, 04:22 PM
|
|||||
|
|||||
|
I used to dilute white vinegar but nowadays I don't mess around with that and use 100% strength - it's dirt cheap and you can reuse it.
For the truly impatient there's muriatic acid but that can be quite dangerous and requires special handling precautions.
|
|
#8
08-11-2009, 06:50 PM
|
|||||
|
|||||
|
Muriatic acid isn't so dangerous... Gloves, safety glasses and some due care and attention are about all you need when handling the full strength stuff...
1/4 cup into a gallon of water does a REALLY good job at cleaning up the calcium/coraline quickly. I used to use pure vinegar all the time - got a little pricey, now I just use small amounts of muriatic acid - and get the job done way cheaper/faster.
__________________
By reading, replying to, commenting about, or in any way accessing the material in this post; including but not limited to storing in a database, retrieving from a database, viewing in a web browser, including it in or making a reference to it in a legal document, or accidentally glancing at it you agree to send me $100.
|
|
#9
08-11-2009, 07:05 PM
|
|||||
|
|||||
|
Where would you get Muriatic acid? I have and old skimmer Viniger is not cutting it.
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind!
|
|
#10
08-11-2009, 07:08 PM
|
|||||
|
|||||
|
Hardware store
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
