|
|
|
#1
09-24-2008, 05:14 PM
|
||||
|
||||
Google sketchup
Not sure if anyone has seen this before but for those that like to draw out what they plan to do first...here is a great link on how to work on Aquariums within sketchup.
http://www.advancedaquarist.com/2007/3/aafeature2 Hope people find it useful.
__________________
Mark...  290g Peninsula Display, 425g total volume. Setup Jan 2013. 
|
|
#2
09-24-2008, 05:50 PM
|
|||||
|
|||||
|
Very good write up! I have been working on my new sump design in Sketchup.
The biggest trick to Sketchup is to re-map the hotkeys, so you can select between your common tools with one hand, while keeping the other on the mouse!  It's also very nice because you're actually drawing plans to scale. I just plain at drawing ideas on paper.. to scale. Tip: With the tape measure you can use it to measure distances, or draw in measure guides. Select your tape measure, then press CTRL, and you will notice a + appear and disappear beside your tape measure.
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006 Last edited by brizzo; 09-24-2008 at 05:53 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
