![]() |
#1
|
|||||
|
|||||
![]() hey guys&gals,
i got a mh setup from a friend but it won't fire up, all it dose is fliker lightly. dose anyone know a place where i can take it to get checked out? thanks ,possitive k ![]() |
#2
|
|||||
|
|||||
![]() what kind of ballast running what kind of bulb?
__________________
Brad |
#3
|
|||||
|
|||||
![]() no sure on everything but know it's a 250w single socket type
|
#4
|
|||||
|
|||||
![]() Is there a number on the ballast? Something like M58, or M81? What type of bulb is it? Any writing on it? Numbers?
__________________
Brad |
#5
|
|||||
|
|||||
![]() i'll take it apart and check it out, and post tommorow......thanx
![]() |
#6
|
|||||
|
|||||
![]() HOLOPHANE
LAMP TYPE---M58/QDC VOLTS-----208 60Hz LAMP W MAX----250 AMPS----1.5 BULB. PHILIPS 250Wr MH250/U M58/E |
#7
|
|||||
|
|||||
![]() Looks like the ballast is or wired for 220v...
Walter
__________________
*30g+- (24x16x18) *Seio 620 + MJ1200 *EuroReef 5-2 *Ebo - 100w Heater *250w PFO HQI w/XM20k |
#8
|
|||||
|
|||||
![]() what should it be wired at?
![]() |
#9
|
||||
|
||||
![]() Is the ballast multi tap? It should show 120v,220v and maybe 347v.
Ridder |
![]() |
Thread Tools | |
Display Modes | |
|
|