![]() |
#1
|
|||||
|
|||||
![]() Hey guys I'm just finishing acid bath and bleach wash for some rocks for my tank move going to use 80% new rock probably ( due to red mushroom infestation lol )
Anyway after the acid wash I bleached the rocks ( approx 1-12 ratio) then I rinsed them and soaked them in hose water over night and they have been sitting in the sun for 1 day , today tho they still smell a bit " bleachy" Do I just wait? Or resoak them again or what you guys think ? I'm assuming I can't start curing till the smell goes away? Plan is after this to cure them in the garage for a month before the move Thanks
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#2
|
|||||
|
|||||
![]() I would rinse a few times with the hose and then soak in RO for a day or two. Then start the curing process.
|
#3
|
|||||
|
|||||
![]() Ah ok thanks, and dont start till the smell is gone you think?
Also i remember reading somewhere saying Prime to pull the ammonia in the water is that a thing or just be patient?
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#4
|
|||||
|
|||||
![]() Mine still smelt of bleach when i started curing. No big whoop. Just rinse a few times.
|
#5
|
|||||
|
|||||
![]() Ok sweet thanks
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |