![]() |
#1
|
|||||
|
|||||
![]() So i've recently become fed up with feeding my calcium reactor with an aqualifter pump. My plan was to tie it into my return line from sump to the display tank.
since the majority of the retune line is flex hose i only have about 7" of hard pvc to tie the line into. I have a leftover self piercing saddle valve from my RO unit that i was thinking of using instead of buying a t-fitting and the scaling it down to john guest fitting. Since the seal is pressure fit I have visions of some leaks coming from the saddle valve. Anyone have experience with this? |
#2
|
||||
|
||||
![]() flex hose as in vinyl or flex pvc??
T-fitting is still a very good choice.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |
#3
|
|||||
|
|||||
![]() Vinyl sorry.
Sent from my SGH-I747M using Tapatalk 2 |
#5
|
|||||
|
|||||
![]() A piercing saddle valve is made of metal and would probably rust with the salt water over time so probably not a good choice.
__________________
In the beginning, there was water. |
#6
|
|||||
|
|||||
![]() Mine is plumbed of of a T fitting..
__________________
Brad |
#7
|
||||
|
||||
![]() You can use the barb t fitting with 1/2" thread fitting. should be able to find them at Home Depot. $10 with change
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |
#8
|
|||||
|
|||||
![]() I use a pvc t fitting (2x 1" x 1x 1/2" npt female thread) then have a 1/2 npt thread to jg fitting. Done.
Lowes has a good selection of jg fittings.
__________________
_________________ Mike. ![]() |
#9
|
|||||
|
|||||
![]() I've done the same as Mark in a few spots. Drilled a hole in a PVC fitting, tapped it, teflon taped a John Guest adaptor and threaded it in. No cutting or cementing plumbing means no down time.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour |
#10
|
|||||
|
|||||
![]() Sorry for the crappy pic, but this is what I did. It comes right off my main return pump with it's own shut off valve.
![]() It's a splitter valve for landscaping/plant irrigation. Works like a charm. You can get them in various multiple configurations and only cost a few bucks. Got mine at Home Hardware. |