![]() |
#1
|
|||||
|
|||||
![]() Ok after a phone call at work about smoke and a burning smell from the fish tank I came home to find this
![]() ![]() This is only 6 months old and not acting as a switch only the relay that sends the signal from the computer into the walls. I will repeat that nothing was plugged into this!!! I fear that if I would have had something plugged into it. It would have started a fire from the continuous power draw that would have continued to feed the short. In all likely hood this one was probably defective and there is no reason to stop using your X-10 but I will ask you check that all your plugs are tight and that they are mounted in such a way that if they should arc and flame they will not be against anything that is immediately combustible. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#2
|
|||||
|
|||||
![]() Holy Christ! We have one, but never seem to have gotten around to using it yet. Hope everyone is ok at home! What a scare!
|
#3
|
|||||
|
|||||
![]() Sence descovering this I have replaced all my X-10 with outdoor timers.
http://www.intermatic.com/consumer/hb77r.htm these are the ones I got.. easy to set so I might have X-10 units for sale soon, hehe.. or I might hook them up for other things. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#4
|
||||
|
||||
![]() blub blub blub (shane surfaces again for a moment)
hmm does't look good steve and concerns me. did you contact x10 and if so what did they say? was there excessive moisture near the unit? i'm interested to hear bc i definately don't need mine doing that. shane |
#5
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#6
|
||||
|
||||
![]() no i'm using the aquacontroller but it has a simliar unit that plugs into the wall that receives the commands via a telephone cable.
thanks for the info |