![]() |
|
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() Why aren't more of us covering our tanks properly when we know full well that our critters are going to attempt to go for the moon sometime ?
I currently have eggcrate over my DT, but am going to build a mesh cover of some kind before I introduce my first fishies. Besides the fact that it blocks light, I have seen some evidence ( thanks Kenny ) of corals becoming 'sun-tanned' with eggcrate Why aren't more of us using something to properly protect our charges ? So; What are you using to cover your tank ? What would you rather use to cover your tank ? |
#2
|
|||||
|
|||||
![]() You can buy DIY Aquarium Screen Top Netting Kits from Bulk Reef Supply. They use a clear screen material. One of the only problems I could see when covering the top of your aquarium is salt creep. With the evaporation of your tank, I could see salt creep adhering to the screen and would be a bit of a pain to keep clean.
On the plus side, obviously, it keeps jumpers in your tank. Wrasse's are well known for jumping out to their demise. |
#3
|
|||||
|
|||||
![]() Quote:
I use this screen on two tanks and there is no issue with salt creep. Best method out there IMO |
#4
|
|||||
|
|||||
![]() Covers pose their own issues. Lack of evaporation and gas exchange. Cords need holes. Lights. Removing.
I made a canopy "surround". Sides only. Most fish dont jump straight up but would be on some angle. My surround is about 8" on all sides. Have not lost a fish to the carpet since. Applied this to my old 20 g first when I lost my neon and firefish in a single evening.
__________________
![]() My 70 Gallon build: http://www.canreef.com/vbulletin/showthread.php?t=66478 My Mandarin Paradise: http://www.canreef.com/vbulletin/showthread.php?t=72762 I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds. ![]() |
#5
|
|||||
|
|||||
![]() Quote:
Ditching my first egg crate cover for a time dedicated canopy was a move up.
__________________
![]() My 70 Gallon build: http://www.canreef.com/vbulletin/showthread.php?t=66478 My Mandarin Paradise: http://www.canreef.com/vbulletin/showthread.php?t=72762 I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds. ![]() |
#6
|
|||||
|
|||||
![]() my clear netting from BRS is in transit. i have too many wrasses (i love) to take the risk any longer. a canopy wouldn't save a fish in this case because the back of the tank is open and my eurobrace is very wide and a great landing strip for fish.
|
#7
|
||||
|
||||
![]() I have glass tops which greatly cut down on evaporation which is great. It stops most of the jumps but some really determined ones will either find small gaps or hit the glass really, really hard and brain themselves. Arg
![]()
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#8
|
|||||
|
|||||
![]() I found some netting at home depot and used their DIY screen rail with corners to make mine. Like paddyob said though, it sucks trying to get around equipment and cords over the sides of the tank. I had some 3/4 acrylic from a job I once did and actually made a 8" frame with it that sits on my tank and my light fixture sits on it. I originally did that to raise my light but once I saw it on there I scrapped my DIY screen I had and haven't lost a fish yet either.
|
#9
|
||||
|
||||
![]() i built a vented canopy that matches my stand with pillars to hide my returns
|
#10
|
|||||
|
|||||
![]() Quote:
Screens don't guaranty anything either, seen fish jump through them and get stuck on top, if they had not been a screen the fish would have been fine. Closed canopies are also no guaranty, seen fish jump and get suck on bracing or even the trim of the tank. Last edited by sphelps; 06-16-2012 at 03:35 PM. |