![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 so I had some white CREE led's on a heatsink left, and thought, lets se how much light thy put out in the open 
		
	
		
		
		
		
		
	
		
		
	
	
	this also with in mind that I want to DIY some landscape light's for the yard. so at 10 pm I went out side and thought, this is a nice spot to light up a 40 feet tall tree that is about 30 feet wide. so my heatsink with the 12 led's on it in place I went inside and hit the switch, BANG !!!! I tel you, UFO's where landing I had at least 150 to 200 feet wide lit up, like it was daylight, unbeleaveble wat a punch thy gave. this even without the lenses on, so if I put lenses on, like 40 degree once, I can lit up the entire propperty from one spot. if you have the chanse to go out one day, with a set of LED's, gust try it, you will be amazed what it douse  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 love to see a picture 
		
	
		
		
		
		
			
				__________________ 
		
		
		
		
	
		
		
	
	
	Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013.  | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 You should see how much light 10w LED emitters put out. Blinding. 
		
	
		
		
		
		
			
				__________________ 
		
		
		
		
	
		
		
	
	
	If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!  | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
		
	 | 
|||||
		
		
  | 
|||||
| 
	
	
		
			
			 Cree XML's at 3 amps is an insane amount of light. Over 900 lumens... more then a 60 watt light bulb! 
		
	
		
		
		
		
		
	
		
		
	
	
	 |