![]() |
#1
|
|||||
|
|||||
![]() Ok so I heard a lot of people saying to try birdsnest for my first sps, so I found a $10 green frag and figured, what the hell, the coppers gone, levels are back to normal whats $10? So I bought it and its polyps are all out and looks beautiful, I turned down my AI a bit to acclimate it over a few weeks, but this morning it has some sort of stringy gunk on it, please tell me this isnt RTN or something bad, if it is, it is.. if not what is it?
![]()
__________________
I'm not 'fallow' you must be talking about my tank! |
#2
|
|||||
|
|||||
![]() When you say the copper is gone does that mean you had copper in the tank with the same rocks?
Looks like it could be a bit too much light but it is not happy polyps are not all out like they should be. It could be that sometimes something from one of your other corals got stuck to that tip that can kill it as well. cut that piece off and see if it recovers. if your water is good it should.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#3
|
|||||
|
|||||
![]() yeah it was a bit of copper from some kent carbon, I have heard that crazy glue over the stressed area is less stressful then snapping it off, I have a secon peice lower in the tank that isnt doing this but the polyps arent as extended as these
__________________
I'm not 'fallow' you must be talking about my tank! |
#4
|
|||||
|
|||||
![]() Could be your lights those sol AI push lots of par.
If the tips are turning white it is bleaching. Cut that piece of and keep an eye on it.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#5
|
|||||
|
|||||
![]() No bleaching I can see but my last one did this before it bleached. I turned down my light to 30% what should I cut it with or do i just snap it off
__________________
I'm not 'fallow' you must be talking about my tank! |
#6
|
|||||
|
|||||
![]() ok trimmed the ugly off with some snips, now I guess I wait and see? lol. softies are so headache free compared to sps
__________________
I'm not 'fallow' you must be talking about my tank! |
#7
|
|||||
|
|||||
![]() If SPS was easy it wouldn't be as much fun...at least that's what I keep telling myself.
|
#8
|
|||||
|
|||||
![]() Lol. For me fun is when things work out
![]()
__________________
I'm not 'fallow' you must be talking about my tank! |
#9
|
|||||
|
|||||
![]() OMG, zoanthids are a nightmare compared to SPS. IN fact I never had any problem with SPS until I got copper poisoning but zoanthids can go thriving for a few months and multiply like crazy only to shrivel and melt without any reason the next day.
SPS are no trouble compare to this. If you want an easy SPS, don't start with a birdnest but rather start with a pocillopora. Thos are easy as can be and very beautiful. There are flashy green and purple and they grow fast.
__________________
_________________________ More fish die from human stupidity than any other disease... |
#10
|
|||||
|
|||||
![]() Quote:
p.s. since trimming the shedding part off it doesnt seem to have anymore, and when I put it in originally it was almost immediately, so I have hope for this one, but we'll see lol if not any one in the area with some really hardy beginner sps gimme a shout
__________________
I'm not 'fallow' you must be talking about my tank! |