|
|
|
#1
07-08-2011, 01:38 PM
|
|||||
|
|||||
frustration!!! - BRS Dual Reactor/ROX 0.8 and the filter pads
For those of you who own the BRS reactors and run the ROX carbon - do you find the carbon always makes its way out of the reactor and through the filter pads?
DRIVES ME NUTS!!!! - luckly it just collects in my sump but i even double up the pads on the exist side of the canister insert and its still coming through. anyone have a DIFFERENT Reactor that doesnt let any of the ROX through? OR has anyone modded theres? I haven't setup the GFO side yet but i assume i will run into the same problem... 
|
|
#2
07-08-2011, 01:53 PM
|
|||||
|
|||||
|
Too much flow perhaps???..... I know lots of people modded other reactors with an enkamat(sp) mod to run the pellets
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 Last edited by fishytime; 07-08-2011 at 01:56 PM.
|
|
#3
07-08-2011, 02:19 PM
|
|||||
|
|||||
|
Quote:
I think the enkemat's holes are also too big. I was going to use filter floss but i think it'll clog with the sand that sometimes circulates through my system.
|
|
#4
07-08-2011, 04:12 PM
|
|||||
|
|||||
|
Two layers of enkemat twisted so the patterns "chris cross"?
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
|
Linear Mode
