![]() |
#1
|
||||
|
||||
![]() okay so this may seem like a stupid question but im going to ask anyways when ever my skimmer is on my pump, pumps out microbubbles is that going to be okay for my tank or should i get rid of them somehow...
|
#2
|
|||||
|
|||||
![]() A little is ok, a lot can be bad. Are you running a sump or not?
|
#3
|
||||
|
||||
![]() my skimmers in my sump, its not enough to see if your sitting down on the couch but you can see it if you are next to the tank just a fine mist
|
#4
|
|||||
|
|||||
![]() Are you sure your from the skimmer. I have seen bubbles on a leak on the return plumbing drawing in air or too fast of flow through the sump.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#6
|
||||
|
||||
![]() theres no baffles and i dont really want to tear my sump apart... it is the skimmer there is no micro bubbles when the skimmer is off
|
#7
|
|||||
|
|||||
![]() Are you able to put a piece of foam on the outlet of your skimmer?
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#8
|
||||
|
||||
![]() Check the air intake hose. I had some bubbles from my skimmer and my intake was partially plugged. Cleaned it up and everything was fine.
|
#9
|
|||||
|
|||||
![]() That is what most manufactures do to cure there problems. Cheap and easy fix. Just make sure to clean the foam as part of regular maintience.
|
#10
|
||||
|
||||
![]() filter sock on pump outlet works awesome. just get a few and rotate them every 3 days or so
|