![]() |
#1
|
||||
|
||||
![]() Currently I am running a 150W Coralife Aqualight Pro (150W 14K Pheonix + 2-65W UVL Actinics) over my 40g cube-ish tank. I keep mostly SPS with zoas and a couple of LPS. There is, without a doubt, a lot of coral in this tank.
Aside from the odd bad-day-on-the-reef, everything is pretty happy in the tank and everybody has nice polyp extension. There are a couple of SPS colonies (namely a red planet, what I believe to be a tricolour valida, a purple bonsai and purple/blue mystery acro) that just don't quite get the colours that I think they should. While the bonsai is slowly starting to get it's greens back, all of 'em are more on the brown side, particularly the areas that should be purple. I also feel that my growth could be a bit better on some of the other colonies. The bonsai is was recently moved to about 4" from the surface and is starting to colour up now that it's there, the rest of them are all probably 10" or so from the surface. With the bonsai starting to colour up now that it's being blasted with light it's making me wonder if I am giving all of the colonies enough light... Currently, my actinics are on at 8:30 am and off at 6:30 pm and MH is on from 10 am to 5 pm. First of all, who has a Red Planet and how far do you have it from what kind of light? I've been reading many different opinions on this coral and it's placement. Would you recommend increasing my photoperiod at all with my current set-up? |
#2
|
|||||
|
|||||
![]() In my opinion, I don't think you will be able to get the colours you are hoping for under that lighting unless you keep them all near the surface.
__________________
![]() Greg |
#3
|
|||||
|
|||||
![]() I'm with Greg on this one. I have my red planet fairly high up in my tank (probly 6-8" from the surface) under 250W.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#4
|
|||||
|
|||||
![]() whos got a frag of red planet they want to sell me in a few week? i would like to try it out under some LEDs
|
#5
|
||||
|
||||
![]() I figured that was what the answer was going to be. I've talked to a few people in other places who have their RPs in about the same position as mine under 150W MH and they have good growth and colour (nice mix of red/green.. not all red). Weird. I'll try slowly moving the RP up with the bonsai.
The strange thing is though the RP actually started bleaching in the original spot I had it in the tank, about 6" from the surface (Yes, full story comes out). I started it where it is now and them moved it to the high 6" spot a few weeks later. Yes, I understand that more than just lighting can cause bleaching but it was given a loooong acclimation time and other frags that were added the same day were fine. I moved it to a low light area to recover and now I'm moving it back out into the bright light. It's been in a moderate to high flow/light spot for a several weeks now and colour has come back a bit but still nothing of its former glory. So is colouration only a function of intensity and not intensity+photoperiod? |
#6
|
||||
|
||||
![]() Paul at Oceanic Corals. I'm sure he'd love to sell you some.
|
#7
|
|||||
|
|||||
![]() I would lengthen you photo period until you get the colors you want. I just set up a cube with a 150w halide only, and I've thrown in a few SPS as an experiment. If they don't do well then it will become an LPS tank. I've started out at a 10 hour photo period, I assume I'll have to go longer for SPS. Time will tell.
|
#8
|
||||
|
||||
![]() Quote:
When you say 10 hours, is that 10 hours of your main light or 10 hours of actinic with a shorter main light period? And again, is coloration a strong function of photoperiod as well? |
#9
|
|||||
|
|||||
![]() For now I only have the one light, so that is the MH photo period. On my 180 when I ran 400s 7 hours was enough (but I did 8 trying to push growth, it was a waste of electricity). I switch to 250s and found 9 hours about right. So now it's 150s (I'm feeling a little inadequate) so I thought I'd start at 10 hours. I like the longer viewing period too
![]() |
#10
|
|||||
|
|||||
![]() Ask 10 people that question and you'll get 10 different answers. I believe it does. I increase the photo period until the coral lighten to what I want. It remains to be seen whether that with happen with 150s.
|