![]() |
|
View Poll Results: What test kit do you use? What alkalinity do you keep? | |||
Salifert <7 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
Salifert 7-8 dKH |
![]() ![]() ![]() ![]() |
4 | 4.55% |
Salifert 8-9 dKH |
![]() ![]() ![]() ![]() |
16 | 18.18% |
Salifert 9-10 dKH |
![]() ![]() ![]() ![]() |
8 | 9.09% |
Salifert >10 dKH |
![]() ![]() ![]() ![]() |
4 | 4.55% |
Elos <7 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
Elos 7-8 dKH |
![]() ![]() ![]() ![]() |
6 | 6.82% |
Elos 8-9 dKH |
![]() ![]() ![]() ![]() |
10 | 11.36% |
Elos 9-10 dKH |
![]() ![]() ![]() ![]() |
10 | 11.36% |
Elos <10 dKH |
![]() ![]() ![]() ![]() |
1 | 1.14% |
High end kit (LaMotte, Hanna, etc) <7 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
High end 7-8 dKH |
![]() ![]() ![]() ![]() |
2 | 2.27% |
High end 8-9 dKH |
![]() ![]() ![]() ![]() |
5 | 5.68% |
High end 9-10 dKH |
![]() ![]() ![]() ![]() |
1 | 1.14% |
High end >10 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
Lower end (API, Hagen, Instant Ocean, etc) <7 dKH |
![]() ![]() ![]() ![]() |
2 | 2.27% |
Lower end 7-8 dKH |
![]() ![]() ![]() ![]() |
8 | 9.09% |
Lower end 8-9 dKH |
![]() ![]() ![]() ![]() |
5 | 5.68% |
Lower end 9-10 dKH |
![]() ![]() ![]() ![]() |
7 | 7.95% |
Lower end >10 dKH |
![]() ![]() ![]() ![]() |
4 | 4.55% |
Multiple Choice Poll. Voters: 88. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() Please do not vote if your tank is not a reef.
------------------------------------------------------------------------------- I have found it very interesting to watch "the" reef tanks of the time over the years. Something I have noticed is 10 years ago, even up to 3 years ago Salifert test kits were "industry standard" for most of the leading reef keepers, they still are for many people. During this time, the leading reef keepers have found that keeping an alkalinity level of 9-10 dKH has given them the best results. In the last 3 or so years Elos kits have begun to move in as the NEW (oh la la lol) "industry standard" for many leading reef keepers. People are also starting use devices like colorimeters, and more accurate test kits like Hanna, LaMotte, Hach. Many of today's leading reef keepers are beginning to suggest (and keep) lower alkalinity levels of 7-8 dKH which makes a lot of sense since NSW is close to 7 dKH. Interestingly enough, many people are noticing that these more accurate means of testing are often reading 2 dKH lower than a Salifert test kit. I have both Salifert and Elos alkalinity test kits (both new), and I have also compared them to a Hanna Colorimeter. When I tested the same sample of my tank's water I got: Hanna Colormeter = 7 dKH (converted from 125 mg/l) Elos = ~7 dKH (Elos goes up in 1 dKH increments, it was pretty close to 7, as it barely changed) Salifert = 9.15 dKH Anyway, this is all just something that I have noticed over the years be reading tank logs, journal type books (old and new), etc. Recently, I have also heard other people talking about this. By no means is this some sort of published data. ![]() ---------------------------------------------------- So long story short, I am interested to see some more evidence. So, what test kit do you use, and what level do you keep your alkalinity at? If you have two kits, and have tested the same sample of water with both, you can vote twice. ![]() Last edited by Myka; 04-30-2010 at 04:29 PM. |
#2
|
|||||
|
|||||
![]() 8 dkH with API test kit.
|
#3
|
|||||
|
|||||
![]() Thanks Kien, I actually quite like the API alkalinity test kit, it is reliable for giving consistent results, but for this particular poll I'm really more interested in Salifert VS Elos, that's why I put the API into the lower end category.
![]() |
#4
|
|||||
|
|||||
![]() Elos 8-9 for us.
__________________
210g Display |
#5
|
|||||
|
|||||
![]() +1, although the API test kits are a little cheaper (around $45.00 for the reef master kit) I still find them very reliable. I haven't used many different Alk test kits but any kit relying on distinct color changes over the old Hagen "Pink nitrate test" comparison is better in my books.
|
#6
|
|||||
|
|||||
![]() I have used Salifert, Elos and API for Kh tests and find that I got similar readings with all three. Since I don't really care to know to the tenth of a degree what my KH is, I've opted to use API lately for it's simplicity. I try to keep my KH at around 9-10 Kh via my API test. It's good to know that I don't need to keep it that high though.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#7
|
|||||
|
|||||
![]() Thanks for the info Danny.
|
#8
|
|||||
|
|||||
![]() I aim for around 7-9, I like to keep it closer to 9 but the tank likes to be around 7 it seems.
I too bought the elos kit after people were complaining about the salifert. I got pretty much the same readings for both elos and salifert. And the elos kit had incorrect instructions which I wasn't impressed with so I've stuck with salifert.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#9
|
|||||
|
|||||
![]() I voted 8 to 9 dkh with both Salifert & Elos. No particular preference. All through the '90,s and into 2000, I always used the cheaper FastTest or whatever the name was. Measured the same as the Salifert I used. Could buy the kits for $10 but dont see the anymore.
I like API for phosphate and nitrate, so may switch to them, as I see you guys say they make alk. test kits also.
__________________
Doug |
#10
|
|||||
|
|||||
![]() with my elos i get a reading of 6
with the API i get 8 too big of a difference??\ anyone else see different results? |