Microbubbles in AquaC Remora

[DiverDude]

Anyone got an idea on how to cure this ?

I've read articles that say to put a piece of foam in the output chamber but when I put foam anywhere on the unit, it changes the water levels in the chambers and the skimmer stops skimming.

The Maxijet 1200 I have on this skimmer is unknown to me as it came with the tank setup (bought used); any chance this could be related to the pump ?

[Jessie55]

the bubbles never go away as far as im concerned i have had the skimmer for almost a year now i just use a sump sock on the return and that gets rid of them. there is a pre filter box that is supposed to help but from what i have read it is not worth it. The sump sock is an eysore if the skimmer is on your display but it is way better than having a bunch of microbubbles floating around.

[Shawner9ster]

I bought the overflow box/bubble eliminator that fits the skimmer. No bubbles, and it allowed me to run carbon and phosban in the outlet portion of the box. I will admit it does take up som room, but I find it worth it just to rid the tank of unsightly micro bubbles! I think you can get them through JL aquatics

[DiverDude]

I didn't know there was an accessory box for it. Looks pretty simple but the pictures aren't good enough for me to use to make one

The manual won't download either so no luck there.

Did some searching on this item and it certainly does seem to do the trick though.

[zum14]

i must be doing something wrong then cause i still have a bunch of microbubbles even with the skimmer box, i might try a sock in the outlet side of the box and see how that works but it may restrict flow to the point of overflowing the box and basically bypassing it. How often do you have to clean the sock? (sorry to go off topic and hijack a bit)

[DiverDude]

Originally Posted by zum14

...How often do you have to clean the sock? (sorry to go off topic and hijack a bit)

No problem at all. The thread is on curing microbubbles in this thing -and that's what were talking about.