Tank Tear down sale SW CALGARY

Richard_Dicosimo · #1 08-16-2008, 05:37 PM

Price update -3 Watt HM bulb ballast and reflectors. 150$Each obo

aquamedic bulbs either 14K or 20K don't remember replaced 3 months ago. the hoods are vent able they are basically the same as the one in the link. http://www.specialty-lights.com/904150.html but a different brand.

-10 gal and 5 gal glass tank's 25$

-100 gal home made acrylic sump with baffles and built in fuge 100$

48" long 24" wide 20" high

-Tank and Metal Stand 800$obo

the tank is 2' wide 9' Long and 18" deep it has low iron glass on one of the viewable panels. it has 2 corner overflows diagonally across from each other. i bought the tank this way i don't fully understand it but it works. one of the over flows is drilled with 1 1½" hole and 1 1" hole. the other over flow has 2 1½" holes and 1 1" hole. the bottom of the tank is drilled for a closed loop system that was run by 2 ocean motion 4 ways on sequence hammerhead pumps the bottom of the tank has 2 2" holes drilled in it for the closed loop return to pump and 16 1½" holes for return to tank. this setup worked well for me. the tank is euro braced and has a center brace. unfortunately due to the size of the tank it was required that i cut it apart to get it down my basement stairs, so the purchaser of the tank would have to have it resiliconed together. if your not up to it i know the man who built the tank, and could probably arrange something with him to rebuild it for you.

the stand is 48" tall built out of 1" square steel tubing. i had it modified from its original height of 32" so that it was at a more comfortable viewing height. you could always have my height reduced and re welded to whatever height you chose.

-power wall... make me an offer...

alright this is a little hard to explain

the top set of plugs and switches is on a 15 amp breaker separate from the bottom set which is on its own 15 amp breaker.

Richard
403-818-8272