![]() |
#1
|
||||
|
||||
![]() So.... I bought a small frag of Poccillipora(sp?) almost a year ago and it came with a vermitid snail. I asked about it back then and was told "don't worry, the pocci will just grow over it". Well, needless to say, here we are almost a year later and all that has happened is the snail has grown along with the frag. How do I "remove" it from my life?
|
#2
|
|||||
|
|||||
![]() You should be able to just break them off if you want with a pair of side cutters.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#3
|
|||||
|
|||||
![]() smush it to utter smithereens (shell & all), those suckers grow back like aiptasia
__________________
Everything I put in my tank is fully dependant on me. |
#4
|
|||||
|
|||||
![]() i treat them like aiptasia, joes juice into their hole, it seems to kill them
|
#5
|
|||||
|
|||||
![]() They will over run your tank if you don't snuff them out. I use a good hobby knife to cut/pry their body off the rock. At one point I had hundreds in my tank....
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006 |
#6
|
|||||
|
|||||
![]() I had a big one on the side of a coral once. I covered him up with some underwater epoxy.
|
#7
|
||||
|
||||
![]() Well..... I can't but him out at all, because he is TOTALLY embedded into the coral. I'm sure his shell is 1/4 of the base of the Pocci.
|
#8
|
|||||
|
|||||
![]() You can do one of three things:
1. get some thin but stiff wire and shove it down the last of the hole that you couldnt' destroy. Its a worm so making him mush will kill him ![]() 2. clip the coral off at the part where the worm lives, then clip the worm part off. now you have a frag you can grow and sell (if you're interested in that sort of thing) or another frag you can place somewhere in the tank. 3. (variation of #1) try either poking him with fine tweezers or destroy as much of his worm tube as you can and then get at him with the wire just destroying his tube doesn't work, they'll just grow it back. you have to actually get to the worm inside and either pick him out or make a gory mess of him. I hate vermetids and had them spawn all over the place when I left one to hang out in my capricornis cuz I couldnt' get to him. At one point I had 6 on one of my clams.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#9
|
|||||
|
|||||
![]() I was able to solve my Snail problem with a flathead screwdriver and a hammer...fortunately for me and unfortunately for the snail, it was growing out of a thinner piece of live rock. I simply chisled him off.
__________________
Rebuilding.... Concept Custom 50gal 24x24x20, herbie overflow, Radion g2, 20 gal sump, Bubble Magus NAC 7, MP10 WES, Speedwave 1320 return. |
#10
|
|||||
|
|||||
![]() if it's one of those big fat vermatid's then christy's recommendation of the wire should work.
__________________
Everything I put in my tank is fully dependant on me. |