![]() |
#1
|
|||||
|
|||||
![]() is there anyway I can seperate one from a rock that it is on???
|
#2
|
||||
|
||||
![]() You should just be able to cut it off the rock and remount it. Remounting it is the tricky part. If your lucky the foot on the rock will regrow into another one.
|
#3
|
|||||
|
|||||
![]() And actually re-mounting isnt that hard either. I use wedding veil material over the mushroom and rock that you want it on. The material is dense enough to keep the mushroom down and at the same time allows sufficient light and flow to the polyp. Leave it for a couple weeks to make sure it has attached.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#4
|
|||||
|
|||||
![]() Quote:
__________________
CadLights 39G Signature Series Started April, 2008 |
#5
|
||||
|
||||
![]() There is another trick that works fairly well. I took a piece of 4" diameter by 2" tall pipe and glued screen onto the bottom of it. Covered the bottom of the pipe with oyster shells and put the rics in. Placed the pipe in a low flow area and let them attach to the oyster shells. Then they are easy to glue wherever you want. It takes a couple weeks for them to attach to the oyster shells.
|
#6
|
|||||
|
|||||
![]() To get it off the rock use a chisel. Make sure you are romoving the ric on a piece of rock. That way it is still attached to the piece of rock and you can glue it right away.
|