stand

[SeaSerpant]

i went to garf.org for some plans on making a stand and since i'm 13 i can't make any sence of it. here is what they told me

Stand Dimensions:

Stand Height = 16.5"
Stand Width = 20"
Stand Length = 48"

Cut List:

Top Frame:
2 - 2 x 4 x 48
4 - 2 x 4 x 17

Bottom Frame:
2 - 48 x 2 x 4
2 - 2 x 4 x 17

Uprights:
6 - 2 x 4 x 16 1/2

Stand Top:
1 - 3/4 inch plywood - 48 x 20

Aquarium Stand Construction Procedure

a. Inspect all pieces for rough or flawed edges. Sand as needed.
b. Lay out boards for top frame.
c. Screw the end boards and supports to front and back pieces
d. Lay out boards for bottom frame.
e. Screw the end boards and supports to front and back pieces
f. Screw the upright boards to bottom frame.
g. Screw the upright boards to the top frame.
h. Put the 3/4" plywood top on the stand.
i. Cover the stand with your choice of covers i.e 1/4 inch finish plywood.

Can someone put it in dumb words for me?