FS: Octopus DNW-200 Recirculating Skimmer

[robert]

$$$$ firm

Used for about 8 months. Great working conditions.



The Recirc 200 skimmer is built on a simple, proven design. This skimmer comes with a needlewheel driven pump. Setup is very easy; simply place the skimmer in your sump, plug it in, adjust the riser pipe, then let it go. This is truly a plug and play skimmer.

Body Width: 8 inches
Height: 30 inches
Footprint: 9 inches X 21 inches
Included Pump: Octopus Turbine 3000 (draw only 90 watts)
Tank Rating: 300 gallons

The skimmer is constructed of cell cast acrylic, true schedule 80 unions are also used on these skimmers.

Collection cup removal is very easy, simply loosen the large union on top and the skimmer and remove the collection cup. Collection cup removal requires less than 1 inch of additonal clearance.

In addition to this skimmer you will also need a feed pump to supply water to the skimmer. Recommend flow is up to 1.5 times the volume of your tank. In this case no more than 450 gallons per hour. Gravity feed is also an option depending on your setup.

This skimmer can be run external from a sump. It may require a small amount of plumbing in order to install this skimmer as you will have to route the exhaust from the skimmer back to your sump.

Please PM for more info. Extra $50 gets it perfectly packed and shipped anywhere within Canada.

[robert]

[phillybean]

Bump for a Great Skimmer for a great deal. Sadly it won't work on my set up otherwise I would have taken it.

[robert]

Thanks to all who inquired about the skimmer. Skimmer is now SOLD.