|
|
|
#1
10-02-2007, 05:09 PM
|
|||||
|
|||||
Pvc framework
Hi everyone. I am planning a pvc frame work for my live rock and I know that holes should be drilled in it to allow water movement. My Questions are 1) should the framework be glued together and 2) the pvc that I am using was stored outside and is a bit dirty. I am wondering if I should boil it just in case, or a would a good scrubbing with a pipe brush be sufficient? Also if anyone here has done this and would like to add there experiences or any tips, or pics of the finished product that would be great. Thanks, Doug.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
|
#2
10-02-2007, 05:20 PM
|
|||||
|
|||||
|
I would not glue it, if you change your mind it is easier to just pull apart. I glued the pvc i used for bigger overhangs but that was all.
__________________
I once had a Big tank...I now have two Huskies and a coyote
|
|
#3
10-02-2007, 06:43 PM
|
|||||
|
|||||
|
Hey Doug
Here's a thread with a pic of my support. I got it from Paletta's book, The New Marine Aquarium.
__________________
Brian ____________________________________________ 220g inwall 48"x36"x30" 110g mangrove refug/sump Poison Dart Frog Vivarium
|
Linear Mode
