![]() |
#1
|
|||||
|
|||||
![]() Seems like such a n00b question.. but I can't figure out how to rinse the mysis off and remove all the preservatives off. I hate the algae blooms I get after feeding mysis, particularly on the glass (film algae) Thanks in advance for any advice and suggestions.
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#2
|
|||||
|
|||||
![]() What I do is thaw the cubes (or usually in my case the chunks as I buy the big packets) wrapped in paper towel. This gets rid of most of the "juice" which contains a lot of the phosphates. Then I will either rinse the paper towel in RO water and feed or if I choose to get really meticulous (sp) then I will scrape the little shrimpies off the paper towel into some RO water and swirl them around a bit and then drain that through some cheescloth or paper towel and then feed. Seems to work pretty good. Other times I am just plain lazy and feed after mixing in some tank water.
|
#3
|
|||||
|
|||||
![]() I put the chunk in a small plastic cup and add some RO water to it then leave it to thaw (15-30 mins). I drain it into a small fish net (fine mesh) then rinse it with more RO water.
__________________
I retired and got a fixed income but it's broke. Ed _______________________________________ 50 gallon FOWLR, 10 gallon sump. 130 gallon reef, 20 gallon sump, 10 gallon refugium. 10 gallon quarantine. 60 gallon winter tank for pond fish. 300 gallon pond with waterfall. |
#4
|
|||||
|
|||||
![]() I use tank water. melt the mysis in the tank water. I then dump it into a very small net. I pour RO water over the net and mysis then I dump the net full back into the cup and pour tank water over that to free the mysis from the net.
|
#5
|
|||||
|
|||||
![]() Buy one of those small colinders from a kitchen store that are used to strain tea etc. Those work the best. Just throw a chunk in the colinder, run it under warm water, and then pat the bottom dry. Works awesome!
|
#6
|
|||||
|
|||||
![]() I do the same as Dirty Reefer.
|
#7
|
|||||
|
|||||
![]() I dont rinse it at all. Just thaw it in some tank water in a cup and dump it in.
__________________
Sean ![]() Back in the good ole days ![]() |
#8
|
|||||
|
|||||
![]() Quote:
Thanks for everyones tips.. seems simple enough, the colinder method is a good idea. I will give this a try tonight! Thanks again to all.
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#9
|
|||||
|
|||||
![]() I thaw PE mysis in a cup or plastic container with RO water. All kinds of oil is released during thawing, so I pour out the water and rinse again. I do this about 4 or 5 times. Lots of little specks of stuff are poured out as well, so only larger mysis gets fed to the fish.
|
#10
|
||||
|
||||
![]() I just throw it in a brine shimp net and run it under water. When its thawed I just toss it into my aquariums. For the African land crab I just throw it into his aquaterrarium.
__________________
120 Gallon Freshwater, 65 gallon salt with 33gal sump/fuge , African rainbow land crab |