Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Other > Lounge

Reply
 
Thread Tools Display Modes
  #1  
Old 11-15-2006, 02:29 AM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,690
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default I can't believe it I broke the chamber

Well i was fixing my euro reef for a modd that i had done. It wasnt modded right any ways. I had to take off the in line pipe for the skimmer feed tube to feed the skimmer . So i put a union on it to allow me to add and remove the feed line with ease other then breaking the seal. SO i refix the problem and ended up taking a 4 -5 " piece of chamber out towards the top of the euro reef ... MAn i'm ****ed off and with out a skimmer since i paided 800 for the friggin thing. I'm ready to pack it in and say good bye to this hobby I think I'm done.

Sorry to bitch online just needed to vent really bad.

If any one has a idea on how to fix this throw me a few hints. I thought about getting a piece of curved acrylic and some weld on 16 or 4 to fix this. would this work.....
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.

Last edited by Skimmerking; 11-15-2006 at 02:33 AM.
Reply With Quote
  #2  
Old 11-15-2006, 03:32 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

Hang in there man!!

It's hard to say without seeing what it looks like, but you should be able to piece it back together with some weldon-16 (maybe not even need a patch).

What I would do is get some of that aluminium duct tape and tape alongside the crack on one side. Then use a bead of weldon16 (much like a silicone bead) along the crack on the uncovered side. Let sit one day; then take the tape off and weldon16 on the side that had the tape. Might take a few tries to fill it in and get it solid, and it will look like butt, but it should hold.

On my ASM G3 when I did the recirc mod, I didn't like where I had drilled it first so I did this to patch the hole so I could try drilling in a different spot. It ain't pretty but function is more important than form.

Hang in there!! We all have days like that.

...

If it makes you feel any better, here's how my day started off. I drove to work as usual, parked in the parkade. My card key opens the parkade door.

I walk to the stairwell of our building, toss out my banana peel and apple core into the garbage by the door, then check to make sure I still have my card key so I can get into our building. Whoops, must have left it in the car. Walk back to the car and look. Hmmm, not here. Well I got into the parkade so obviously I had it five minutes ago? What the .. ?? Flash back to the banana peel and apple core. Oh no!! I threw it in the garbage can!!

Ok, wait until nobody's around then go start poking in the garbage can. Hmmm, I don't see it? But it must be here? Look around once more. Nobody. Ok, here goes. Tip the garbage can upside down and empty it onto the ground so I can find my #$@%$#%$#!!! access card.

Who walks up? A VP of our company .... "Oh .. hi .."

And one of our sales guys ...

And someone else ...

Ok, my card isn't here. Go back to the car and look again. Yup, here it is, it fell under my seat.

Nothing like a little dumpster diving to start your day!!!!!
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
  #3  
Old 11-15-2006, 08:26 AM
albert_dao albert_dao is offline
Good Guy Albert
 
Join Date: Jun 2004
Location: Richmond
Posts: 3,035
albert_dao will become famous soon enough
Send a message via MSN to albert_dao
Default

You think that's bad; I just stubbed my little toe against one of those latching chin-up bars.
__________________
This and that.
Reply With Quote
  #4  
Old 11-15-2006, 02:14 PM
Joe Reefer's Avatar
Joe Reefer Joe Reefer is offline
Masterbaiter
 
Join Date: Jan 2005
Location: Edmonton
Posts: 1,205
Joe Reefer is on a distinguished road
Send a message via MSN to Joe Reefer
Default

The other day busted my new kalk reactor before it even got used.
__________________
M2CW
Reply With Quote
  #5  
Old 11-15-2006, 02:18 PM
Doug's Avatar
Doug Doug is offline
Rest In Peace
 
Join Date: Aug 2001
Location: Kamloops BC
Posts: 4,920
Doug has disabled reputation
Default

Tony, you crack me up. Again.

Mike, we will find a way to fix it. Hope your day is better today than last night.
__________________
Doug
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:51 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.