Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 06-27-2006, 03:12 AM
vanreefer's Avatar
vanreefer vanreefer is offline
Member
 
Join Date: Aug 2004
Location: S Surrey/W.Rock
Posts: 649
vanreefer is on a distinguished road
Default how long without halides??

Background:
I am moving next weekend and to ease the shock of a new system on my livestock I intend to have both setups running for about a week while the levels settle in the new tank. I am using the LR from the existing setup so I don't expect a cycle.
Question:
How long would you let a moderately stocked SPS tank run without halides???

I will leave the 260W of PC actinic on the tank... Plus I am only running the MH for three hours a day right now becouse of the heat

I was planning on 5-6 days ...???
Thanks
Dan
Reply With Quote
  #2  
Old 06-27-2006, 03:25 AM
TheReefGeek's Avatar
TheReefGeek TheReefGeek is offline
Member
 
Join Date: Jan 2006
Location: Edmonton, Alberta
Posts: 1,503
TheReefGeek is on a distinguished road
Default

It is so much easier when you have 2 tanks, this will be no prob:

1. Setup new tank as desired, and enough new water to make up any volume difference between your new tank & old, get this oxygenated & heated.
2. Same day as move, or day before, move over and setup lighting
3. Drain all existing water into 5g buckets, and rubbermaids, don't go crazy on rubbermaid size, they get heavy quikly, but I found 20g ones filled 1/2 full was manageable with 2 people once they are filled some live rock each.
4. Put live rock & critters/corals into the same rubbermaids with your tank water. The tub(s) with critters/corals throw powerhead(s) & heater(s) in there.
5. Transport! If you are going a long distance buy a cheap 400w or even less power inverter for your vehicle, to keep the powerhead & heater going during the trip. If it is a short trip, dive fast.
6. Unload, dump your new water in, let it mix & come to temperature, all the while keep your rubbermaid(s) with live critters happy with a heater & powerhead.
7. Install critters, and voila!

Other tips:
1. To get your critters out, lower the water volume to a few inches, then the fish are easy to get without stressing them out chasing them with a net all over the place
2. If you are transporting a sandbed, depending on age & detrius contect you might want to rinse out a large portion thoroughly or else you will be releasing a lot of trapped junk in to you new system, and might get a spike. I have rinsed in tap water without any problems, no spikes even with 6" sandbeds in 100g+ tanks.
3. Don't turn your lighting on for the first day or two
__________________
Rory

Reply With Quote
  #3  
Old 06-27-2006, 03:25 AM
TheReefGeek's Avatar
TheReefGeek TheReefGeek is offline
Member
 
Join Date: Jan 2006
Location: Edmonton, Alberta
Posts: 1,503
TheReefGeek is on a distinguished road
Default

And to actually answer your questions, a few days without light is no big deal, just tell them there is a tropical storm blocking the sun.
__________________
Rory

Reply With Quote
  #4  
Old 06-27-2006, 03:59 AM
littlesilvermax's Avatar
littlesilvermax littlesilvermax is offline
Member
 
Join Date: Oct 2004
Location: Winnipeg
Posts: 779
littlesilvermax is on a distinguished road
Default

I would say 5 or 6 days.

Anything longer and I would get out the eggcrate and window screen and re-acclimate.
__________________
250 BB Starphire SPS, clams, & zoos
3 x 250 DE, IC 660 W/T5s
OM 4-way, Hammerhead Pump
Calcium, Kalk, RO filters, magnesium, Excellent prices
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:45 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.