diy 150

[smellsfishy]

gauging interest
i have a 150 with a cracked bottom from a drilled hole gone bad. i was going to replace the bottom as the quote from the glass place was $145 for 12mil (1/2")and $17 for each hole drilled witch i thought was extremely fair. I unfortunatley just don't have the time to do it anymore. Alternatively,i was told by the glass guy that he has fixed many tanks with this exact problem and he has just put a full or half sheet of 1/4 over the bottom and siliconed heavily only drawback is you can't redrill it. it has 4 holes each corner and overflows for both sides one side good. perfect project for the diy person.

make me an offer.