|
|
|
#1
12-16-2005, 01:57 AM
|
|||||
|
|||||
dissolving kent salt
does anyone else have problems with residules while trying to mix kent salt?? i mix it to 1.024 using RO/DI water, in a bucket with a heater and powerhead with venturi for airation. after 24 hrs+ it still seems somewhat cloudy with a layer of white on the bottom. am i being impatient??
|
|
#5
12-16-2005, 04:40 AM
|
|||||
|
|||||
|
I noticed this when I was trying to heat the water too quickly and the heat left the precipitate *sp* . I know heat can cause calcification on heaters. So it is my guess, that it was the hot water that caused this. So, now I get the water to tank temp first then throw in the salt and mix with a drill paint stirer. Seems to have solved my precip probs.
Oh, and for clarification I was trying to rush the temp to tank temp by taking RO/DI water and heating it on the stove, then pouring it into a bucket that contained salt mix.
__________________
Chad
|
|
#6
12-16-2005, 05:29 AM
|
|||||
|
|||||
|
hmmmm, interesting that idea. now that you mention it, i do notice alot of that powdery white coating on the heater as well. but on the bottom of the bucket? i'm just using a heater and not at that high of a temperature either--no more than 82f...no where near boiling...
|
|
#7
12-16-2005, 05:57 AM
|
|||||
|
|||||
|
Try mixing it with just a pump overnight.If it helps then heat it to spec.
Try to mix it by hand first with a spoon too. Last edited by deacon hemp; 12-16-2005 at 06:00 AM.
|
|
#8
12-16-2005, 06:13 AM
|
|||||
|
|||||
|
I see no reason to mix by hand, I just throw in my cups of salt and throw the drill stirer at it and voila, mixed and airate in under a min
 Also, I had the preciptate when I just had a heater in a bucket and let it sit overnight or sometimes longer, but I was using a broken heater that would take the temp to about 84. Anyways... give it a try and see, try mixing when it is cold and then throw the heater in and heat it to tank temp.Also, you do not want to make a super concentrated mix, in other words, you take a bucket and fill it up with 5 gals of water and then proceed to dump say 5 cups of salt, then you try to mix it and add more water till your up to the correct S.G. . If you do it this way you are asking to have percipitate problems
__________________
Chad Last edited by Chad; 12-16-2005 at 06:23 AM.
|
|
#9
12-16-2005, 06:16 AM
|
|||||
|
|||||
|
any idea what the price of kent will be at j&l boxing day sale?
__________________
Given sufficient thrust pigs will fly just fine. 90 Gallon LPS tank - Challice, Acans, Favia, Diplo and Zoos 125 Gallon SPS Coming Soon!
|
|
#10
12-16-2005, 01:11 PM
|
|||||
|
|||||
|
Details on how I make NSW are near the top of the page here....
http://www.lostmymarblz.com/reeftips...ottomtanks.htm It is possible that the venturi is adding bubbles to your water making it appear cloudy. Also, you can't just dump in salt and expect it all to mix. Some salt will fall to the bottom of the mixing container and stay there unless you go to the trouble of getting the powerhead into all the nooks and crannies of the container.
|
Linear Mode
