![]() |
#1
|
|||||
|
|||||
![]() So I found a patch of cyano growing on my overflow drain. I blasted it with boiling tap water using a turkey baster, the same way you'd blast aptasia. Only with much less force, so as to not force it off of its resting place and risk spreading it. It instantly lost its color and died, I hope. That was two days ago and so far no sign of it returning.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#2
|
|||||
|
|||||
![]() awesome man may be you have something here .
congrats
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#3
|
|||||
|
|||||
![]() I've been thinking about the various bacteria in our tanks that utilize excess nutrients. There are bacteria that consume ammonia, nitrite and nitrate and these seem to be invisible little bacteria that lives in our tanks.
However, the bacteria that consumes phosphate is cyanobacteria and behaves differently than the nitrogen cycle bacteria. Cyano is definitely a bacteria and not an algae. And it's been around for billions of years and is one of the oldest critters (if you can call bacteria a critter) in the fossil record. Anyway, cyanobacteria is in our tanks to consume phosphate. Phosphate is one of the end results of decayed matter just as ammonia, nitrite and nitrate are. If there isn't enough macroalgae (or some other means of nutrient export) in a system to consume the phosphate and nitrogen in a tank, there will be outbreaks of cyanobacteria to consume the phosphate, and micro and macroalgae to consume the nitrogen. So, basically, the best way to get rid of cyanobacteria is to reduce phosphate in a system, whether by reducing bio-load, increasing water changes, adding better quality water going into the tank to begin with, better skimming, adding non-invasive macroalgae, or all of the above. |
#4
|
|||||
|
|||||
![]() I think it will work fine as long as you catch it when its still small.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#5
|
|||||
|
|||||
![]() not sure of the effects on reef tanks but with my planted tanks with any sign of cyno i've used a syringe full of hydrogen peroxide with absolutely no ill effects on plants or fish. not sure if it's done in marine tanks though...
![]() |