|
|
|
#1
07-02-2005, 03:58 PM
|
||||
|
||||
Princess Auto Fans (wiring)
I had my new canopy delivered on Friday (Thanks Rob!!!)
How do you wire up the fans. he recommended using the Princess Auto 4" fans I am probably going for a ride today and might as well pick up what I need and get that part done. Thanks
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors 
|
|
#2
07-02-2005, 05:11 PM
|
||||
|
||||
|
The wiring is simple. Get your Dad to do it, like I do!
 They are a 110V fan, 100+ CFM (I will post that pic. ASAP) Anyway, the fastest way I have found to supply them pre-wired; pick up wire, (I usually use power-tool replacement cords; Home Depot-around $8 each. But this includes the plug on it as well) You can also grab in-line switches too if you like.I get them soldered on, with heat shrink tape to protect the leads from corrosion. (there are only 2 wires used, black and white. 2 leads on the fan.) Plug in, and away you go!
__________________
www.aquariumstands.net
|
|
#3
07-02-2005, 09:36 PM
|
||||
|
||||
|
well picked up 2 fans (they are the right size) hopefully they are the right ones
 I picked up 2 plugs from there as welll they have an end for like some sort of (hmmm not sure how to explain it) anyways it fits right over the 2 prongs that are on the fan, works like a charm.. no soldering or anything..Now I have to attempt to drill the 4 holes for each fan and then mount and grill the outsideJim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors
|
Linear Mode
